Translate

THANKS

Thanks for being touch with us on Social media and online website

×
Thanks!
for visiting the electricaldon.com website.Received many applications for ITI ELECTRICIAN for job. Kindly note our team is working on it, shortly you will receive call from them.

APPLY only if you have Electrical wiremen or Electrical Supervisor Licenses its Mandatory. !

Thankyou for your Patients. !

Search This Blog

differences between Fuse & Circuit Breaker

 


Basis for Comparison

               FUSE

        CIRCUIT BREAKER

MAINTENANCE

Fuse can only be used 1 time, it is a non- reusable device

Circuit Breaker can offer a total no of operations as declared by the manufacturer.

TRIP TIME

2-5ms, quickest operating device

Vary as per the device, ex: for ACB it can be 30ms & for MCCB can be less than 10ms

UTILIZATION CATEGORY

If the first letter is ‘g’ means both protection (O/L + S/C), If the first letter is ‘a’ only S/C will be there.

If category A it means no Icw shall be there, If category B, Icw shall be there

METHOD OF TRIPPING

‘SOLDER’ for Overload, ‘ELEMENT’ for Short Circuit

Available as ‘MICROPROCESSOR’ type & ‘THERMAL MAGNETIC’ type
Labels:

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Transformer Fittings And Accessories

  Oil conservator with drain plug and oil filling hole Oil level indicator Drain valve with plug Filter valve with plug Air release vent Exp...

  • difference between STS and ATS ?
     A Static Transfer Switch (STS) utilizes a static electronic component (SCR), which permits a transfer in less than four milliseconds (1/4 o...
  • WTI and OTI of Transformer
      WTI and OTI of Transformer The WTI means  winding temperature Indicator  and OTI means  Oil Temperature Indicator  which indicates the win...
  • nema elec symbol with diagram
  • WHAT IS IP CODE ?
     IP Code, or Ingress Protection Code[1], IEC standard 60529, sometimes interpreted as International Protection Code, classifies and rates th...
  • Open circuit test or No-load Test
      Open circuit test or No-load Test of Transformer The Open circuit test of the transformer is one of the type test of transformer by which ...
  • Low voltage protection
      Low voltage measurement and control device is mainly used for the measurement and control of 0.4KV voltage grade of low voltage wire feedi...
  • ELEMENTS
      Elements   - RESISTOR  - CAPACITANCE OR CAPACITOR  - INDUCTOR  = reactance = impedance =susceptance =admittance - VOLTAGE SOURCE - CURRENT...
  • Earthing or Neutral Grounding Transformer
      Earthing or Neutral Grounding Transformer When a transformer is used for the purpose of providing a neutral point for grounding purpose in...
  • auto-put-into device of reserve-source
      auto-put-into device of reserve-source device is divided into the incoming line and the busbar connection,The device can be used in the 11...
  • Protection Relay Selection Mode
    Differential protection schemes transformer protection schemes motor protection relay line protection relay generator protection device