The Feedback in Control System in one in which the output is sampled and the proportional signal is fed back to the input for automatic correction of the error (any change in desired output) for further processing to get back the desired output.
Electrical cloud of answers, Unlimited study Notes, and Downloads with videos
Subscribe to:
Post Comments (Atom)
-
A Static Transfer Switch (STS) utilizes a static electronic component (SCR), which permits a transfer in less than four milliseconds (1/4 o...
-
WTI and OTI of Transformer The WTI means winding temperature Indicator and OTI means Oil Temperature Indicator which indicates the win...
-
IP Code, or Ingress Protection Code[1], IEC standard 60529, sometimes interpreted as International Protection Code, classifies and rates th... -
Open circuit test or No-load Test of Transformer The Open circuit test of the transformer is one of the type test of transformer by which ...
-
Low voltage measurement and control device is mainly used for the measurement and control of 0.4KV voltage grade of low voltage wire feedi...
-
Elements - RESISTOR - CAPACITANCE OR CAPACITOR - INDUCTOR = reactance = impedance =susceptance =admittance - VOLTAGE SOURCE - CURRENT...
-
Earthing or Neutral Grounding Transformer When a transformer is used for the purpose of providing a neutral point for grounding purpose in...
-
auto-put-into device of reserve-source device is divided into the incoming line and the busbar connection,The device can be used in the 11...
-
Differential protection schemes transformer protection schemes motor protection relay line protection relay generator protection device
No comments:
Post a Comment