A lock-out relay is generally placed in line before or after the e-stop switch so the power can be shut off at one central location. This relay is powered by the same electrical source as the control power and is operated by a key lock switch. The relay itself may have up to 24 contact points within the unit itself. This allows the control power for multiple machines to be locked out by the turn of a single key switch.
Electrical cloud of answers, Unlimited study Notes, and Downloads with videos
Subscribe to:
Post Comments (Atom)
-
A Static Transfer Switch (STS) utilizes a static electronic component (SCR), which permits a transfer in less than four milliseconds (1/4 o...
-
Electrical secondary equipment generally refers to the various types of microcomputer protection and control device, microcomputer seconda...
-
The auxiliary class protection device refers to some unusual protection devices with auxiliary function,the main products are 961 communic...
-
Elements - RESISTOR - CAPACITANCE OR CAPACITOR - INDUCTOR = reactance = impedance =susceptance =admittance - VOLTAGE SOURCE - CURRENT...
-
. Earthing system or grounding system connects specific parts of that installation with the Earth's conductive surface for safety and ... -
Main transformer protection Line Protection Transformer protection Motor protection Capacitor protection Generator protection auto-put-into ...
-
busbar differential protection relay is suitable for the 110KV and the following various voltage levels of a single bus、Single parent segm...
-
generator backup protection relay is applicable to the generator protection that the water turbine capacity whose power is not more than 1...
No comments:
Post a Comment